1、選用抗靜電劑對織物進行樹脂整理。用抗靜電劑對織物進行樹脂整理，經過浸軋、焙烘而粘附在合成纖維織物的表面，使織物具有一定的抗靜電效果。這種方法現在只用于民用服裝以克服衣服纏身、火花放電、污染吸灰等靜電現象。

1. Use anti-static agents for resin finishing of fabrics. Resin finishing of fabrics with anti-static agents, followed by immersion rolling and baking to adhere to the surface of synthetic fiber fabrics, giving the fabrics a certain anti-static effect. This method is now only used for civilian clothing to overcome static electricity phenomena such as clothing entanglement, spark discharge, pollution and dust absorption.

2、在滌綸或錦綸聚合物的內部添加抗靜電劑，如磷酸脂、磺酸鹽等表面活性劑或引入第三單體以取得耐久性抗靜電纖維。由于添加劑的抗靜電劑大多數是遇堿會起反應或分解的表面活性劑，因此在織物整理或洗滌時忌用堿性洗滌劑，以防止影響抗靜電效果，這種纖維適宜作無塵服、無菌衣，也可用于民用服裝等。

2. Add anti-static agents such as phosphoric acid esters, sulfonates, and other surfactants or introduce third monomers inside polyester or nylon polymers to obtain durable anti-static fibers. Due to the fact that most of the anti-static agents used in additives are surfactants that react or decompose when exposed to alkali, alkaline detergents should be avoided during fabric finishing or washing to prevent affecting the anti-static effect. This fiber is suitable for use as dust-free clothing, sterile clothing, and can also be used for civilian clothing.

3、在普通織物中混入導電纖維。在普通織物中混入導電纖維，這種防靜電織物由于不受所在環境的影響，現已普遍被接受和認可。這種防靜電織物的抗靜電性能與導電纖維的種類和導電成分(金屬、石墨、炭黑等)在纖維中的分部情況，又分為幾種不同類型。其中含有炭黑、石墨等導電成分的其它復合型導電纖維可以直接用于織造的長絲，經紗中每隔一定間距(如1.5 cm左右)嵌入一根導電長絲，即可獲得很好的抗靜電效果，是目前用來織造防靜電工作服面料的導電纖維。

3. Mixing conductive fibers into ordinary fabrics. Mixing conductive fibers into ordinary fabrics, this anti-static fabric is widely accepted and recognized because it is not affected by the environment it is in. The anti-static performance of this anti-static fabric is divided into several different types based on the type of conductive fibers and the distribution of conductive components (metal, graphite, carbon black, etc.) in the fibers. Other composite conductive fibers containing conductive components such as carbon black and graphite can be directly used for weaving long filaments. A conductive long filament can be embedded in the warp yarn at regular intervals (such as about 1.5 cm) to achieve good anti-static effect, making it the best conductive fiber currently used for weaving anti-static workwear fabrics.